Küppersbusch IKE327022T Benutzerinformation Seite 35

A
3. Apply the covers (A) and (A1) (in the
bag) in to the intermediate hinge.
4. Install the appliance in the niche.
5. Push the appliance in the direction of
the arrows (1) until the upper gap cover
stops against the kitchen furniture.
6. Push the appliance in the direction of
the arrows (2) against the cupboard on
the opposite side of the hinge.
7. Adjust the appliance in the niche.
Make sure that the distance between
the appliance and the cupboard front-
edge is 44 mm.
The lower hinge cover (in the
accessories bag) makes sure that the
distance between the appliance and the
kitchen furniture is correct.
Make sure that the clearance between
the appliance and the cupboard is 4
mm.
8. Open the door. Put the lower hinge
cover in position.
A1
9. Attach the appliance to the niche with 4
2
1
10. Remove the correct part from the hinge
4 mm
44 mm
screws.
cover (E). Make sure to remove the part
DX, in the case of right hinge, SX in
opposite case.
35
I
I