Excessive Temperature Alarm; Ice-Cube Production - Küppersbusch IKE 309-6-2T Gebrauchs- Und Montageanleitung

Excessive temperature alarm

An increase in the temperature in the freezer
compartment (for example due to an power failure)
is indicated by:
- flashing temperature;
- freezer compartment flashing (symbol 2);
- red illumination of display;
- sounding of buzzer.
When normal conditions are restored:
- the acoustic signal shuts off;
- the temperature value continues to flash;
- the display illumination remains red.
When you press key "E" to de-activate the alarm, the
highest temperature reached in the compartment
appears on indicator 4 for approximately 5 seconds.
At this point the flashing stops and the display
illumination changes over from red to white.
During the alarm phase, the buzzer can be switched
off by pressing key E; the illumination of the display
remains red until normal storage conditions are
restored.
Thawing
Deep-frozen or frozen food, prior to being used, can
be thawed in the refrigerator compartment or at
room temperature, depending on the time available
for this operation.
Small pieces may even be cooked still frozen, directly
from the freezer: in this case, cooking will take longer.

Ice-cube production

This appliance is equipped with one or more trays
for the production of ice-cubes. Fill these trays with
water, then put them in the freezer compartment.
Do not use metallic instruments to remove the
trays from the freezer.
22
Performance optimization function
The performance optimization function is activated
by pressing key E (several times if necessary) until
the corresponding icon appears
and some moving horizontal lines appear on the
display.
In this condition the chosen temperatures are
automatically set, in the best conditions for storing
food and therefore any possible operation through
the keys does not cause any change as long as this
function is activated.
It is possible to de-activate the function at any time
by pressing key E (see paragraph "Function
Activation").