Assembly - Helios F300 Betriebsanleitung

Installation and initialisation
Incorrect installation and initialisa-
tion

6.2 Assembly

Schweißen verboten
WARNING!
Danger of injury due to incorrect installation and
initialisation!
– Ensure that there is sufficient space for assembly
before beginning any work.
– Handle open, sharp edged components with care.
– Pay attention to tidiness and cleanliness in the place
of assembly! Loosely positioned components or
those left lying around are potential sources of acci-
dents.
– Mount the components professionally. Comply with
the specified screw torque levels.
– Secure components so that they cannot fall down or
fall over.
– Pay attention to the following before initialisation:
– Ensure that all installation work has been imple-
mented and completed in accordance with the
details and information in the manual.
– Ensure that no persons are found within the
danger area.
Clearances
The fan must be mounted so that there is sufficient
clearance for maintenance and repair measures
NOTICE!
Danger of device damages due to welding work on
the fan!
– Do not carry out any welding work on the fan.
25