General
Tips and recommendations
Specific safety information
Signs in this manual
1.4 Copyright protection
1.5 Other matters
6
Useful tips and recommendations as well as information
for efficient and fault-free operation.
The symbols below are used in safety guidelines to indicate specific
dangers.
DANGER!
Note to dangers due to electrical currents. There is the
danger of death or major injuries in the case of non-
compliance.
In order to identify working instructions, results descriptions, lists,
references and other elements, the following signs and marks are
used:
.
Identifies step-by-step working instructions.
ð Identifies a status or automatic sequence as a result of an
action.
n
Identifies lists and list entries without a specific order.
Ä Identifies references to chapters of this manual.
This manual is copyright protected and exclusively determined for
internal purposes.
Transfer of the manual to third parties, reproductions of any type or
form – including in extracts – as well as utilisation and/or notification
of the contents are not permitted without the written authorisation of
the manufacturer, apart from for internal purposes.
Breaches are subject to damage compensation. Further claims are
reserved.
All details and information in this manual have been compiled under
consideration of the valid norms and regulations, the state of the
technology and our years of knowledge and experience.
The actual scope of supply may differ from the explanations and
presentations described here in the case of special designs, use of
additional order options or due to the latest technical modifications.