Mechanical Dangers - Helios F300 Betriebsanleitung

Safety

2.6 Mechanical dangers

Fan
Vibrations
Sharp edges and pointed corners
12
WARNING!
Danger of injury due to rotating parts!
– During operation, do not reach into the moving wheel
or tamper with the wheel.
– Do not open covers and maintenance covers during
operation.
– Make sure that the wheel is not accessible during
operation.
– Pay attention to the after-run time: make sure that
no more components are moving before opening the
covers for maintenance purposes.
– Switch off the fan before beginning any work on
moving components and secure it against being
switched back on. Make sure that all components
have come to a standstill.
– This fan fulfills the requirements of EC-machinery
directive 2006/42/EC, when one of the following
requirements are secured:
– The fan is attached at pressure and suction
side.
– The fan is attached at pressure side and
equipped with safety devices (f.e. safety wire) at
suction side.
– The fan is attached at suction side and equipped
with safety devices (f.e. safety wire) at pressure
side.
– The fan is equiooed at pressure and suction side
with safety devices (f.e. safety wire) at pressure
side..
WARNING!
Danger of injury caused by heavy vibrations!
– Do not take the vibration dampers out of operation.
– Do not remain within the vibrating area during oper-
ation.
CAUTION!
Danger of injury due to sharp edges and pointed
corners!
– Proceed carefully when working near to sharp edges
and pointed corners.
– Wear protective gloves in case of any doubt.