Connecting An Audio System - JVC AV-29TX1EP Bedienungsanleitung

Connecting an Audio System

You can use your audio system as front speakers instead of
the front speakers on the TV.
Caution:
Do the following before connecting,
• Turn the power of all the equipment off.
• Set the amplifier volume to low.
• Read the manuals provided with the amplifiers and
speakers.
1: Stereo amplifier
2: Front speakers (Magnetic-shielded Type, L, R)
1
L
R
AUDIO OUT
(Terminals on rear)
Notes:
• Use the AUDIO OUT terminals for connecting an audio
system.
The volume output is controlled via the TV and The AU-
DIO OUT terminal output is not interrupted by head-
phone connection.
• Use magnetic-shielded speakers for front speakers 2
to prevent interference by the TV.
Connect your stereo amplifier 1 to the AUDIO
1
OUT terminals.
2
Turn the TV on and set the volume to the low-
est setting.
3
Press .
OK
The MENU appears.
4
Press / to choose SOUND SETTING. Then
press .
OK
The Sound Setting menu appears.
MENU
SOUND SETTING
STEREO/I•I I
0
BASS
TREBLE
BALANCE
HYPER SOUND OFF
SPEAKER
OFF
TV OK
2
ON
ON
5
Press to choose SPEAKER and press
/
/ to choose OFF. Then press
To output sound from the TV speakers:
Set SPEAKER to ON.
6
Press .
OK
This completes the settings.
7
Turn the stereo amplifier on and re-adjust the
volume setting, then press
volume.
Note:
• Setting the volume of the stereo amplifier too high
may damage the speakers.
.
OK
/ to adjust the
27