Information Button; Standby Button - JVC AV-29TX1EP Bedienungsanleitung

Remote Control Buttons and Functions
4 Hyper Sound Button
You can enjoy sounds with a wider ambiance.
Pressing (Hyper Sound) turns the Hyper Sound on or
off.
• HYPER SOUND can be also set to ON by operating MENU.
For details, refer to "Hyper Sound" on page 17.

5 Information Button

Pressing
play as follows.
PR LIST
PR
AV
01
02
03
04
05
06
07
08
09
TV
-10
21:30
Current time
No indication
About the PR List:
You can choose TV channels and EXT terminals operating
the PR List. For details, see " Use the PR List " on page 6.
About the current time display:
This TV uses teletext data to set the current time.
• If the TV has not received a station that has teletext data
since it was turned on, the time display is blank. To see the
current time, choose a station that is broadcasting teletext
data. As long as you do not turn off the TV, then even if you
choose other stations, the time will still be displayed.
• When watching videos, the wrong current time is some-
times displayed.
Note:
• When an EXT terminal with no input signal is chosen,
the EXT number and ID become fixed on the screen.
The (Information) button is also used for the menu
operation.
Please refer to "Menu Operation" on page 14 for more in-
formation.
10
(Information) changes the dis-
ID
BBC1
OK
+10
6 TV Button
You can return to the TV mode instantly by pressing
The button is also used for the menu operation.
TV
Please refer to "Menu Operation" on page 14 for more in-
formation.
7
Buttons
You can adjust the volume.
/
The buttons are also used for the menu operation.
Please refer to "Menu Operation" on page 14 for more in-
formation.

8 Standby Button

Pressing (Standby) button turns the TV
on or off.
• When the TV is turned on, the power lamp changes
from red to green.
9 Colour Buttons
The colour buttons are used for the teletext operations or the
menu operations. Please refer to "Teletext Control Buttons
and VCR/TEXT Switch" on page 12 or "Menu operation" on
page 14 for more information.
0 OK Button
The button is used for menu operation.
OK
Please refer to "Menu Operation" on page 14 for more infor-
mation.
-
Buttons
You can choose a channel by pressing the
The / buttons are also used for the menu operation.
Please refer to "Menu Operation" on page 14 for more in-
formation.
.
TV
/
buttons.