JVC AV-29TX1EP Bedienungsanleitung Seite 5

Preparation
AUTO PROGRAM
CH 10
20%
TV OK
When the ACI menu is displayed:
If your Cable TV station supports ACI (Automatic Channel Installation),
the ACI menu is displayed. Please operate it according to the "ACI Op-
eration" procedures at the bottom of this page. The channel is set quickly
to the PR channel according to the order decided for all the channels.
7
Press
MENU
OK
When a T-V LINK compatible VCR is
connected
8
Turn the VCR on.
9
Press
MENU
OK
The transmission of PR channel data from the TV to the VCR begins. The display disappears once the data trans-
mission ends.
This completes the Initial Setting procedure.
Notes:
• For details about T-V LINK, refer to page 5.
• Depending on the type of VCR, the display may change once data transmission ends. In this case, refer to the VCR's In-
struction manual.
ACI Operation
1
Press to choose your area.
/
2
Press .
OK
"ACI" is displayed in the AUTO PROGRAM menu and the ACI starts.
The EDIT menu is displayed after the channels have been set.
If "ACI ERROR" is displayed, press
• If "ACI ERROR" is displayed anyway, press
ordinary Auto Programming.
4
EDIT
PR
AV
01
02
03
04
05
06
07
08
09
TV OK
to exit the Edit menu.
OK
The T-V LINK menu is displayed.
T-V LINK
DOWNLOAD TV VCR
TV OK
EXIT
.
OK
TRANSFER.....
OK
ID CH/CC
BBC1 CH 21
CH 22
CH 23
CH 24
CH 25
CH 26
CC 01
CC 02
CC 03
ID
INSERT
MOVE
DELETE
MANUAL
When a T-V LINK compatible VCR is
not connected
8
Press
to re-start the ACI.
and cancel ACI, then start the
Note:
• If a station you want to view is
not set to a PR channel, manual-
ly set it using the Edit menu.
(See page 22.)
.
TV
The menu disappears.
TV
This completes the Initial Settings
procedure.
Note:
• The ACI may not work correctly
if you don't have good reception.