JVC AV-29TX1EP Bedienungsanleitung Seite 21

Features
4
Press to choose a channel, then press the
/
blue button.
The (locked) mark appears, and the chosen channel
is locked.
• To cancel the Child Lock, press the blue button again.
• Repeat step 4 to lock all channels which you want to
lock.
5
Press .
OK
This completes the setting.
Notes:
• You cannot choose a locked channel using the
tons on the remote control nor the P
TV.
• Even if a locked channel is displayed, the programme
cannot be watched.
To watch a locked channel
1
Press the number buttons to choose a locked
channel.
The (locked) mark appears.
5
2
Press (Information).
The ID No. input menu appears.
5
ID NO.:
3
Press the number buttons to enter the ID
number.
The locked channel can now be watched.
If you forget the ID number:
Do steps 1 of "To set the Child Lock". After confirming
the ID number, press
20
but-
/
buttons on the
to exit the menu.
TV
Decoder (EXT-2)
When you connect a Decoder to a T-V LINK compatible VCR,
you have to set the Decoder (EXT-2) to ON for watching
scrambled channels.
1
Choose a scrambled channel.
The scrambled picture appears.
• If the picture is unscrambled you don't need to
change the Decoder (EXT-2) setting.
2
Press to display MENU. Then Press
OK
choose FEATURES.
3
Press to display the Features menu.
OK
4
Press to choose DECODER (EXT-2).
/
5
Press to choose ON.
/
6
Press .
OK
The T-V LINK menu appears.
T-V LINK
DOWNLOAD TV VCR
TV OK
EXIT
7
Press .
OK
TRANSFER.....
The translation of channel data from the TV to the
VCR begins. The display disappears once the data
transmission ends.
• Repeat steps 1 to 7 watch a different channel using
the decoder.
Note:
• Depending on the type of VCR, the display may
change once data transmission ends.
In this case, refer to the VCR's manual.
/ to