Herunterladen Inhalt Inhalt Diese Seite drucken

Connection With The Mains; Operation - EuroLite LED SLS-12 BCL Bedienungsanleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Set the M
device to one of the stand alone modes and set each S
ASTER
well as to any DMX channel mode.

Connection with the mains

Connect the device to the mains with the enclosed power supply cable.
The occupation of the connection-cables is as follows:
Cable
Pin
Brown
Live
Blue
Neutral
Yellow/Green
Earth
The earth has to be connected!
If the device will be directly connected with the local power supply network, a disconnection switch with a
minimum opening of 3 mm at every pole has to be included in the permanent electrical installation.
The device must only be connected with an electric installation carried out in compliance with the IEC-
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Lighting effects must not be connected to dimming-packs.
On the rear panel, there is an IEC socket (Power Out). Connect the output with the mains input of the next
fixture until all fixtures are connected.
Please note: A maximum of 8 devices may be linked together. After every 8 devices, the fixtures must have

OPERATION

After you connected the spot to the mains, the device starts running.
The LED display lights up and you can choose the desired mode via the buttons MODE, SET UP, UP and
DOWN.
See following graphic.
MODE
SET UP
White
Amber
DIMMER
Flash speed,
increasing
Sound-control
Sensitivity
SOUND
selection,
increasing
Fading colors
Switching colors
AUTO
Speed set
Color select
STATIC
Flash speed,
COLOR
increasing
SELECT
International
L
N
a renewed connection with the power mains.
UP / DOWN
~
~
~
~
~
~
~
~
LAVE
Adjust the intensity of the white color
Adjust the intensity of the amber color
is off,
Activate the sound-control
is lowest level,
Select the internal fading color program
Select the internal switching color program
Adjust the speed of the internal programs
Select static color
is off,
21/25
device to any DMX address as
FUNCTION
is slowest,
is highest level
is slowest,
00062196, Version 1.3
is fastest
is fastest

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Led sls-5 bcl5191539551915390

Inhaltsverzeichnis