Herunterladen Inhalt Inhalt Diese Seite drucken

Renlig FWMND6 Handbuch Seite 12

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

ENGLISH
2
Close the drawer gently
Select the required programme by turning
the programme selector dial (1)
The appliance is now switched on. The indi-
cator light of button 5 starts to blink.
At the end of the programme the selector di-
al must be turned to position O, to switch the
appliance off.
For the description of each wash cycle,
the compatibility among the washing
programmes and the options, consult the
chapter «Washing Programmes».
Caution! If you turn the programme
selector dial to another programme
when the appliance is working, the red
indicator light of button 5 will blink 3 times
and the message Err appears on the display
to indicate a wrong selection. The appliance
will not perform the new selected
programme.
Reduce the spin speed or select the No Spin
or Rinse Hold by pressing button 10
By selecting a programme, the appliance
proposes automatically the maximum spin
speed provided for that programme.
Press button 10 repeatedly to change the
spin speed, if you want your laundry to be
spun at a different speed. The relevant indi-
cator light illuminates.
Select the available options by pressing
buttons 6, 7, 8 and 9
Depending on the programme, different
functions can be combined. These must be
selected after choosing the desired pro-
gramme and before starting the programme.
Pour fabric softener
into the compart-
ment marked
(must not exceed the
«MAX» mark in the
drawer).
When these buttons are pressed, the corre-
sponding indicator lights illuminate. When
they are pressed again, the indicator lights
go out. If an incorrect option is selected, the
integrated red indicator light of the button 5
flashes for 3 times and the message Err ap-
pears on the display.
For the compatibility among the wash-
ing programmes and the options see
chapter «Washing Programmes».
Select the Delay Start by pressing button 4
Before you start the programme, if you wish
to delay the start, press this button to select
the desired delay.
The selected delay time value will appear on
the display for a few seconds, then the dura-
tion of the programme will appear again.
You must select this option after you have set
the programme and before you start the pro-
gramme.
You can cancel or modify the delay time at
any moment, before you press button 5.
Selecting the delay start :
1. Select the programme and the required
options.
2. Select the delay start by pressing button
4.
3. Press button 5:
– the machine starts its hourly count-
down.
– the programme will start after the se-
lected delay has expired.
Cancelling the Delay Start after having star-
ted the programme:
1. Set the washing machine to PAUSE by
pressing button 5.
2. Press button 4 once. On the display will
appear
'.
3. Press button 5 again to start the pro-
gramme.
12

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis