Linea 2000 Domo DO212SV Gebrauchsanleitung Seite 40

DO212SV
We advise replacing the lters regularly to ensure an optimal operation of the
machine. Dirty lters will reduce the suction power drastically. After every cleaning,
clean the dust reservoir and the lter to extend the life span of your machine.
Cleaning the oor brush:
1. Remove the oor nozzle from the upright vacuum
cleaner. Press the release button at the back of the oor
n¬ozzle and remove it from the machine.
2. Turn the release under the oor nozzle to the left using a
screwdriver or coin, and remove the closure ap.
3. Remove the rotating oor brush from the oor nozzle.
4. Remove hairs and other dirt that have wrapped around
the oor b-rush. If you do not clean the oor brush
regularly, it will become damaged and your machine will become unusable.
5. The rotating oor brush may be rinsed off under running water. Make sure that it is
completely dry before using it.
6. Place the oor brush back into the oor nozzle when it is clean.
7. But the closure ap back in place and secure by turning the release clockwise.
8. Push the nozzle back onto the stick. The machine is now again ready for use.
Stuck hairs can damage the machine or your oor. Always remove the hairs stuck on
the brushes.
Cleaning the machine:
Clean the machine with a slightly moist soft cloth. Dry the machine off well. Never
submerge the machine in water!
Storing the machine:
Store the machine in a dry and clean place. Avoid extreme temperatures and long-
•
term exposure to sunlight.
To store the machine in a compact manner, you can fold up the stick by pressing
•
on the button.
40