VEVOR C8 Originalanleitung Seite 8

machine run until no water runs through the trigger gun"
3)Always disconnect the electrical plug from the socket prior to
maintenance or cleaning.
4)4To ensure a long and problem free working life, please take the
following advice:
Wash out water hose, high pressure hose, spray lance and accessories
before mounting.
Clean the connectors of dust and sand, Rinse the detergent spraying
attachment after use. Clean the nozzles."
5) Clean the water inlet filter regularly once a month or more frequently
according to use. Carefully loosen the filter with a screwdriver and clean it .
Check that it is intact before re-mounting it, The inlet filter must always be
fitted inside the water inlet pipe to filter out sand, limestone and other
impurities, as they will damage the pump valves.
6) To ensure an easy connection and that o-rings do not dry up; the
couplings should be greased regularly.
Symptom
The machine will
not start
Fluctuating
pressure
BREAKDOWN SERVICE
Cause
The machine is not
plugged-in
Faulty receptacle
The fuse has blown
Faulty extension
cable
The pump is drawing
in air
Valves dirty, worn or
Recommended action
Plug the machine in
Try another receptacle
Replace the fuse Unplug
Try without the extension
Check that hoses and
connections are airtight.
Contact your service centre
- 6 -
other appliances
cable