Chicco MoDe Gebrauchsanleitung Seite 18

Mode Booster Seat
GB
Instructions
IMPORTANT: READ THESE INSTRUCTIONS CARE-
FULLY BEFORE FIRST USE TO GUARANTEE YOUR
CHILD'S SAFETY AT ALL TIMES. KEEP THEM FOR FU-
TURE REFERENCE. YOUR CHILD'S SAFETY MAY BE
AT RISK IF YOU DO NOT FOLLOW THESE INSTRUC-
TIONS CAREFULLY.
WARNING: BEFORE FIRST USE, REMOVE AND DIS-
POSE OF ALL PLASTIC BAGS AND PACKAGING MA-
TERIALS AND KEEP THEM OUT OF REACH OF CHIL-
DREN.
WARNINGS
• W ARNING!: Never leave your child unattended in
the booster seat
• W ARNING!: Always fasten it to a seat using the
two harness straps (seat and backrest).
• W ARNING!: Once the booster seat has been in-
stalled, check that it is fastened correctly to the
chair seat and backrest, and firmly in place.
• W ARNING!: Never use broken or unstable chairs,
folding chairs, stools, rocking chairs of chairs with
armrests.
• T he minimum recommended chair dimensions
when using this product are: Seat width 290 mm;
seat depth 320 mm; backrest height 210 mm.
• T he booster seat is not suitable for infants who
cannot sit upright on their own.
• D o not use the booster seat for more than one
child at a time.
• W ARNING!: This is not suitable for use for children
under 18 months and over 3 years of age, or those
weighing more than 15 kg.
• W ARNING!: Before fastening the booster seat to
the chair, always check that the floor and chair seat
are perfectly horizontal; never install the product
on chairs which are positioned on a sloping surface.
• D o not allow children to play unsupervised near
the booster seat.
• A TTENTION! Do not use the booster seat if any
parts are broken or missing.
• W ARNING!: Never uses use spare parts other than
those supplied or approved by the manufacturer or
retailer.
• WARNING!: Always use the safety harness
• W ARNING!: Do not use the booster seat on chairs
that where the child can reach out with his feet and
push against the table, other chairs or any other
structure as this can cause the chair supporting the
booster seat to topple over.
• Do not install the product on highchairs.
• D o not use the product on a raised surface without
fastening all the belts (seat and backrest).
• W ARNING!: Do not leave small objects on the
booster seat which the child could swallow
• W ARNING!: Do not use the booster seat on chairs
in the vicinity of curtain cords, windows or heat
sources.
• W ARNING!: Never use the product as a swimming
aid or floating chair in a swimming pool.
• W hen not in use, the booster seat must be kept out
of the reach of children.
• D o not use the booster seat positioned directly on
the floor
COMPONENTS:
A - Backrest
B - Seat
C - Safety harness straps
D - Rear fastener straps
E - Lower fastener straps
F - Removable activity tray
G - Activity tray connector button
H - Activity tray connector stabilisers
I - Height adjustable legs
J - Height adjuster buttons
K - Backrest release button
L - Height adjuster indicators
TIPS FOR CLEANING AND MAINTENANCE
The cleaning and maintenance operations must only
be carried out by an adult.
Periodically inspect the booster seat for broken, torn
or missing parts: if this is the case, do not use it.
Only use water and a soft damp cloth to clean the
plastic parts of the product
The activity tray is dishwasher proof.
Clean the fabric parts with a soft damp cloth.
INSTALLATION:
1. Undo the lower harness belts (E) as seen in Diag. 1.
2. Release the activity tray (F) from the booster seat
by turning the side handles outwards, as seen in dia-
gram 2;
3. Raise the backrest (A) as seen in Diagram 3A, push
it downwards to lock it in a vertical position, as seen
in diagram 3B; when it is mounted correctly it will
"Click" into place.
4. The booster seat can be adjusted to 3 different
heights; to adjust the seat height, remove the child
from the booster seat, turn the frame over as seen in
diagram 4. Now adjust the legs, sliding them into the
desired position (Diag. 5).
Once the desired height has been selected, check
that the leg (l) has 'clicked' correctly into place. Re-
peat this procedure for the second leg.
To lower the frame, press the button (J) on the side of
the seat, sliding the leg inside the frame (diagram 6)
until you find the right position.
ATTENTION! It is important to check that the legs
are completely level to avoid compromising the sta-
bility of the booster seat. Check that the height indi-
cators (L) are identical on both legs.
18