Temperature Unit; Add Camera - Beurer BY 77 Gebrauchsanweisung

Lullabies
Via the parent unit, you can activate one of fi ve lullabies that will then be played over
the camera. To activate one of the lullabies, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
(1, 2, 3, 4 or 5).
• Confi rm using the ( OK ) button.
Alarm
You can set an alarm on the parent unit – this will sound on the parent unit after 2, 4
or 6 hours, as you choose. To activate an alarm, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
you wish the alarm to sound.
• Confi rm using the ( OK ) button.

Temperature unit

You can set the device to display the temperature in degrees Celsius (°C) or degrees
Fahrenheit (°F).
• Use the left/right direction arrows (
• Use the up/down direction arrows (
perature.
• Confi rm using the ( OK )button.

Add camera

You can connect one parent unit with up to four cameras.
To add a camera to the parent unit, proceed as follows:
• Use the left/right direction arrows (
• Use the up/down direction arrows (
• Confi rm using the ( OK ) button. 1,2,3,4 appears on the screen.
• Use the up/down direction arrows (
the ( OK ) button.
• Now hold down the PAIR button on the rear of the camera until an acoustic signal
is heard and the transmission image from the camera that has been added appears
on the screen.
/
/
/
/
/
/
/
/
/
appears on the screen and the unit searches for a camera.
22
) to select the menu item
) to select the lullaby of your choice
) to select the menu item
) to select the time period after which
) to select the menu item
) to select the required unit of tem-
) to select the menu item
) to select the menu item
) to select a number and confi rm with
.
.
.
.
.