Cleaning And Maintenance - Create Air Tower Large Bedienungsanleitung

Timer Button
Press the Timer button to program automatic shut-off. The LED indicator will light up. By
pressing successive buttons you can select:
1 h / 2 h / 3 h (1+2 h) / 4 h / 5 h (1+4 h) / 6 h (2+4 h) / 7 h (1+2+4 h)/ No timer
Speed adjustment button
Press the Speed button to select the fan speed.
The corresponding LED indicator will light up: Smooth speed
lights up), Low speed
indicator lights up) and High Speed
Swing Button
Press the Oscillation button to turn the automatic oscillation function on or off. When
the oscillation function is activated, the RGB light indicator performs an alternating light
movement from left to right.
Light intensity button
Press the Light
100%, 50%, Screen off.
(Function available only via remote control).
Silent Mode button
Press the Silent Mode button to turn off the acoustic sound emitted by the fan when the
buttons are pressed.
(Function available only via remote control).
• Turn off the appliance and disconnect it from the mains power supply before proceeding
with any cleaning.
• Never immerse the device in water.
• Do not allow water or cleaning products to enter the inside of the appliance.
• Use a soft, damp cloth, with or without a mild soapy solution, to carefully clean the outer
surface of the product.
• It is recommended to periodically clean the appliance by lightly passing the nozzle of a
vacuum cleaner over the protective grilles to remove dust or dirt accumulated inside or on
the surface of the fan.
• ATTENTION: Do not use harsh detergents, chemicals or solvents, as they may damage the
finish of the plastic components.
• Make sure the appliance is completely dry before reconnecting it to the mains.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of waste
electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one
for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled, treated
and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the environ-
ment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal of the
product by the user involves application of the administrative sanctions according to the laws.
10
E NGL I SH
(1/2 of the RGB indicator lights up), Average speed
+
Intensity button

CLEANING AND MAINTENANCE

(The RGB indicator lights up completely).
to adjust the
(1/4 of the RGB indicator
(3/4 of the RGB
panel's lighting intensity: