grabner Happy Cat Evolution Gebrauchsanweisung Seite 8

► Separate the guy-line from the wire.
► Feed the guy-line through the fair-
lead eye and cleat on the port side of
the mast-holder, and secure the line
by figure eight knot.
iMPorTanT: keep the guy-line inside
the bowsprit, so as to avoid having to
re-feed it every time you wish to use
the gennaker.
8
fiTTinG of THe
Guide-PulleY
► Attach the pulley block without line to
the vacant upper bracket at the mast
top element.
► Knot both pulley-blocks with rope
at the rear to the left and right side
frames.
► Shackle both ratchet-cleats to the lo-
wer shackles of the shrouds to port
and starboard.