grabner Happy Cat Evolution Gebrauchsanweisung Seite 10

SCHeeT aPPoinTMenT
► Knot the end of the gennaker sheet
to the clew (CLEW).
► Feed the second end of the gennaker
scheet through a pulley-block at the
rear frame section.
► Take the sheet to the ratchet-cleat on
the same side of the boat, and pull
the end inward from the outside.
10
► Take the sheet farther to the ratchet-
cleat on the opposite side of the boat.
► Feed the sheet outward from the in-
side of the ratchet-cleat.
► Go farther back to the second pulley-
block at the rear frame element.
► Take the sheet end forward, between
the forestay and luff of the genna-
ker and knot the sheet to the clew
(CLEW).