Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
.
English
3.
Attach the tool with the flange (6) and the
tool socket screw (5). Make sure to place
the flange with the convex side upwards
(see figure).
ON/OFF SWITCH
1.
To switch on the multitool, push the ON/
OFF switch (1) forwards.
2.
To switch off the tool, pull back the ON/
OFF switch.
SPEED CONTROLLER
With the speed controller (2) you can adjust the
speed according to application. Select the
appropriate speed setting and make sure the
multitool does not become overloaded and
stops running.
For increasing the speed setting, turn the
speed controller (2) to the desired setting. The
controller can be adjusted from 1 – 6. The
speed rate can also be changed during opera-
tion. The required speed rate for cutting or
sanding a workpiece depends on the material
that has to be machined. For best perfor-
mance, make some practical tests.
ACCESSORIES
Circular saw blade
Purpose: Cross cuts, Drop cuts, Close cuts, e.
g. Cutting-back door frames.
Saw blade
Purpose: Cross cuts, Drop cuts, Close cuts, e.
g. Cutting-back door frames.
18
7062387_Multitool_300W_Ma_#1510-01.indd 18
Scraper
Material: Timber products, Plastics, Varnish
and coatings, Remaining adhesive.
Purpose: Scraping and Cleaning Surfaces,
Removing remaining Adhesives and Coatings.
Sanding pad
Material: Plastics, Varnish and coatings,
Metals.
Purpose: Sanding Work, due its size also suita-
ble for Corners.
MAINTENANCE AND CLEANING
•
Before any work on the device, always
disconnect it from the mains
•
The machine does not require special
maintenance. Do not disassemble it and
do not try to repair it yourself.
•
Use a moist cloth to clean the machine.
Do not use aggressive chemicals or
abrasives.
•
Keep the ventilation louvers clean and free
from debris.
•
If the machine becomes damaged, have it
repaired by a professional or turn to our
customer support department. If the car-
bon brushes require replacement, have
the replaced by a professional or turn to
our customer support.
15-06-16 12:13
Werbung
Inhaltsverzeichnis
