Operation; Radio Functions - auna 10031202 Bedienungsanleitung

Using Cooking Timer
• Press <Timer> once to enter the timer mode.
• Press <UP> or <DOWN> to adjust the value (from 1 minute to 23hours and 59minute) or press <Preset +>
or <Preset -> to recall the preset value, press <Timer> to start the cooking timer.
• When the timer is running press <Timer> to pause the timer. To restart the timer press <Timer> again.
• 30 seconds before the kitchen timer run time has expired the device begins to acoustically
indicate,with individual signal tones, the arrival of the set time. Thereby the interval between the in-
dividual tones becomes shorter and shorter. When the set time has arrived the kitchen timer's alarm.
• signal sounds as a continuous tone.
• Press and hold <Timer> for 2 seconds to terminate the timer and leave, when the timer is running.
When SDA Active
• When the date/month/(year) matches with the SDA which has been enable, alert becomes active.
• As the SDA active, Sound of beep toggles at the Speaker for 10 minutes, Muted Radio even radio ON
and The „SDA'' goes flash on LCD display.
• Press any key to start its corresponding function and the SDA will be terminate.
• When SDA is active, even key-lock has been switched on, press any key can terminate alarm.
When alarm is active
• When the real time clock matches with the alarm which has been enabled, alarm becomes active.
• As the alarm becomes active, the AOT if exists, is terminated immediately.
• If Beep sound alarm is selected, A, Sound of beep toggles at the Speaker B, The duration of alarm is
10 minutes.
• If Radio alarm is selected, the duration of the alarm is 60 minutes.
• If CD alarm is selected, the duration of the alarm is 60 minutes.
• Press any key to terminate the currently active alarm, even key-lock has been switched on.
Start the radio
• Press <Power> once to turn on the unit.
• Press <FUNC/User> key to select Radio.
• Press <Power> again to turn off the unit.
Select User
• Press and hold <FUNC/User> for 3 seconds to change the current USER, the selected „USER A" or
„USER B" will show on display for 5 seconds.
• Each user arranged 32 memories ( User A and memory1 preset in factory).

Operation

Radio Functions

23
www.auna.de