Storage And Maintenance; Disposal Of Electrical And Electronic Equipment - Homcom 824-118V70 Bedienungsanleitung

EN
5. Please keep the remote control safely to avoid impact and falling.
6. When you need to replace the battery, please follow the steps shown in the figure. Pay
attention to the battery polarity when loading the battery. Never reverse. (Use 2pcs AAA
batteries)
7. If the machine is not used for a long time, please take out the battery and seal it to avoid
damage to the remote control and reduce battery running.

STORAGE AND MAINTENANCE

1. Turn off the power and unplug the power before cleaning.
2. After the product is completely cooled, wipe the outer surface with a soft cloth, and use a
soft brush to clean the ventilation holes.
3. After cleaning, until the product is completely dried, it can be used by electricity or put
into the original packaging, and placed in a dry and ventilated place for proper storage.
4. Do not rinse directly with water during the cleaning process to avoid damage to the
machine.
5. Avoid using a thinner, toluene, acidic detergent, alcohol and other chemical agents to
wipe the product.

DISPOSAL OF ELECTRICAL AND ELECTRONIC EQUIPMENT

To protect our environment and to recycle the raw materials used as
completely as possible, the consumer is asked to return unserviceable
equipment to the public collection system for electrical and electronic.
The symbol of the crossed indicates that this product must be returned to
the collection point for electronic waste to feed it by recycling the best
possible raw material recycling.
By ensuring this product you will prevent possible negative effects on the
environment and human health, which could otherwise be caused due to
improper disposal of that product. The recycling of materials from this
product, you will help to preserve a healthy environment and natural
resources.
4