Remote Control - Homcom 824-118V70 Bedienungsanleitung

EN
Plug in first.
Put the plug into the socket, products in standby, power indicating light is on.
ON/OFF button: Push "ON/OFF" button to working state, push it again to standby .
SPEED button: Push "SPEED" button to set from HIGH-MIDDLE-LOW fan speed.
WIND button（OPERATE ON THE RENOTE CONTROL ONLY）: Push "WIND" button
repeatedly, and the wind will cycle in the order of "normal wind - natural wind - sleep wind"
OSCILLATION button: Push "OSC" button to oscillate the fan, push it again to stop the
function.
TIMER button: Push "TIMER" button from 00-15 hours.
LED light button: Push "LIGHT" button to turn on the light function.
Note: After 3 minutes automatically turn off the screen with no operation.

Remote control

HOW TO USE THE REMOTE CONTROL:
1. After opening the remote control bag, remove the battery cover and load it into 2pcs No.
AAA batteries (Not Included) for direct use.
2. When using the remote control, the emitter of the front section of the remote control must
be aligned with the receiving window on the product. (Note: The receiving window is
located on the front of the fuselage, above the button)
3. The remote control can be used normally at a distance of about 5 meters from the front of
the product and within a range of 30 degrees.
4. Avoid direct sunlight to the receiving window, so as not to affect the receiving effect.
3