Garantie - Storch HPM 3000 Bedienungsanleitung

again. Otherwise the measured value
results can be falsified.
7.2 Connection and operation of the
hammer electrode for conducting
measurements inside wood
Item No. 60 80 12
Place the measuring needle adapter
onto the measuring needles on the
HPM 3000.
Warranty
Warranty conditions:
A warranty period of twelve months from the date of purchase/date of invoice
applies to our tools for commercial customers. If we have granted an extended
warranty period, this period will be noted separately in the operating manual
for the equipment in question.
Claims:
If you wish to claim under our warranty or guarantee, please return the com-
plete device and your invoice to our logistics centre in Berka, postage paid, or
send it to one of our authorised service centres.
Please contact the chargeable STORCH service hotline first:
+49 (0)202 . 49 20 – 110.
Your rights under our warranty or guarantee:
Claims can only be accepted for material defects or manufacturing errors, and
only assuming intended use of the appliance. Wear parts are not covered by
such claims. All claims shall become void in the event of installation of third
party components, improper handling and storage, as well as in the event of
obvious disregard of the operating instructions.
Repairs:
All repairs have to be conducted on our premises or by an authorised STORCH
service centre.
Place the measuring needles of the
hammer electrode on the appropriate
object
Use the hand knob to knock the mea-
suring needles carefully into the wood
until they have reached the desired
depth (max. 5 cm).
Read the measured value from the
instrument.
39