Monoblock Recirculation Filter (Optional) - Novy Mini Pureline 810 Bedienungsanleitung

EN

When cleaning in a dishwasher the filter may
discolour as a result of the salt content. This
does not affect its operation.

If the instructions above are not carried out,
serious soiling can cause a fire hazard.
Replacing the grease filters
− Before replacing the grease filter, clean the edges
of the part in the extractor hood in which the filter
is placed.
− Grasp the filter with 2 hands.
− Make sure that the handle on the filter is on the
bottom side.
− Insert the back of the filter in the opening, press the
filter upwards at the front and make sure it clicks tight.

You can obtain a new grease filter from
a dealer which you can find on the Novy
website. Article number grease filter:
• 810/811/816: 609014
• 820/821/826: 7400020
• 860/861/866: 7400020
5.4

Monoblock recirculation filter (optional)

When selecting recirculation, always set the recirculation
programme on the extractor hood (see 4.4 Programming
recirculation mode (optional) ).
If the recirculation mode is chosen the appliance is
connected to a recirculation box with a monoblock
recirculation filter, or a monoblock recirculation filter
is fitted in the extractor hood behind the grease filter.
Replacement indicator monoblock recirculation
filter

Indication: red indicator light stays on.
After a set time a red indicator light on the appliance
shows that the monoblock filter must be replaced.
– 78 –