Intouch - Novy Mini Pureline 810 Bedienungsanleitung

EN
Change the code
− Simultaneously press and
− The green light on the remote control flashes as
many times as the selected code. If another code is
required repeat this step again (1x flashing is code 1,
2x flashing is code 2 etc. There are total of 10 codes).
− Simultaneously press on the cookerhood
until the second green Speed indicator lamp is blinking.
− Press the key
seconds to confirm the settings. The cooker hood
and the remote control are now in line with each other.
4.6

InTouch

The extraction hood has the InTouch function. If you
have an induction hob from Novy with InTouch, you
can operate the extraction hood from the hob. There
is also the option that the extraction hood can be
operated with a remote control.
Programming InTouch on the induction hob
The remote control must first work with the hood. If
necessary, the remote control code can be changed,
as described in Section 4.5 Remote control .
− Connect the hob to the mains supply.
− Touch simultaneously the keys
induction hob until you hear a beep signal (prox.
7 sec.).
− The cooker hob now searches automatically for the
hood code.
− Wait until the cooker hood illumination begins to
flashing OR you hear a "click" sound when you have
an extractor hood without lighting (Be patient, this
can betake a while).
− Does the light blink or you hear the "click" sound;
press immediately on any InTouch key or
or or
− You will hear a "beep" signal to indicate the link
between the two devices.
Now you can operate the hood with the keys on the
induction hob.
on the remote control within 10
on the induction hob.
and
– 73 –
.
and
and on the
or