Change In Colour Temperature With Led-Lighting - Novy Mini Pureline 810 Bedienungsanleitung

EN
5.5.2 Change the colour temperature of the LED-
lighting
First make sure that the power supply of the hood has
been disconnected. Remove the plug from the hood
or switch off the power group.
The colour of the LED-lighting has been set to 2.700 K
(warm white) by default. If the colour is to be changed
to 4.000 K (neutral white), follow the instruction given
below:

The spotlight holders can easily slip out
of your hands. This can cause damage.
Therefore, hold the spotlight holders firmly
when removing and reinserting them.
− Open the bottom panel at the bottom of the hood.
− Press the spotlight holder carefully, and then use a
tilting movement to remove the spotlight holder from
the cooker hood. Do this with two hands.
− The wiring has been connected to the LED-lamp
with a connector.
− Disconnect the connector from the LED-lamp and
move the wiring to the other free connection on
the lamp.

Colour LED lighting 2,700K (warm white) or
4,000K (neutral white) depending on choice
of connection. Make sure that all LED spots
are connected in the same way to prevent a
difference in colour of LED lighting.
– 81 –