Remote Control - Novy Mini Pureline 810 Bedienungsanleitung

EN

Use the run-on time of 30 minutes so the
cooking odours can be properly removed in
the monoblock filter.
Read paragraph 5.4 Monoblock recirculation filter for
more information about replacement of the monoblock
recirculation filter.
Deactivate the recirculation mode
− The motor must be switched off
− Press
2
until the 3rd green LED flashes 3 times.
The run-on time is again set to 10 minutes (instead
of 30 minutes) and cleaning indicator for recirculation
is switched off.
4.5

Remote control

The remote control for hood is preinstalled and ready
for use.
Reprogramm the remote control
If the set code disrupts other transmitters, another
code can be selected using the remote control. There
are 10 different codes.
Determine the code used
Simultaneously press
control flashes as many times as the selected code
(there are 10 code options in total).
and at the same time for 3 seconds
3
Lighting
1
1
Increase speed levels
2
2
Decrease speed levels
3
3
Switch on / off
4
4
5
Novy button: not applicable
5
3 sec
and
. The lamp on the remote
– 72 –