Decoderwerk 20102 Benutzerhandbuch Seite 22

Commissioning
The decoder is connected directly to the
◆
track signal for the S power supply.
When connecting the voltage source, the
◆
polarity of the connection does not need to be
taken into account.
No separate power supply can be
◆
connected.
Power supply
Voltage range
9-24V
◆
The voltage at the output of the decoder is
◆
directly dependent on the supply voltage and
can therefore be adjusted by selecting the
voltage source can be controlled.
Protocols
DCC
◆
Märklin Motorola
◆
Power requirement
Quiescent current below 5mA
◆
The current requirement of the output
◆
depends on the connected article.
6