Decoderwerk 20102 Benutzerhandbuch Seite 21

Commissioning
The decoder is intended for mounting in a
◆
Märklin or Trix C track and has 4 mounting
holes for this purpose.
Carefully press
◆
mounting pins provided in the inner bed of
the track.
The side fitted with components always
◆
points towards the track.
The surface of the installation location and
◆
other materials in contact with the decoder
should be made of non-conductive material.
Installatio
n
the decoder onto
Dimensions
Width 28mm
◆
Depth 42mm
the ◆
Height approx. 4mm
◆
Connections
2 solder connections
◆
Grid dimension 3.5mm
◆
Field of application
The decoders are designed for a storage
◆
and continuous operating temperature
range of 0-50° Celsius.
Avoid large temperature fluctuations.
◆
5