Start Up; Content Of The Package; Set Up; Installation - Varytec ARC One Bedienungsanleitung

to hold the plug. When not using the device for an extended period of time, be sure to
disconnect the plug from the receptacle
Important: Damages caused by the disregard of this user manual are not subject to
warranty. The dealer will not accept liability for any resulting defects or
problems. Make sure the electrical connection is carried out by qualified
personnel. All electrical and mechanical connections have to be carried out
according to the European safety standards.

8. Start Up

Thanks for using our ARC One. Carefully unpack the box and check the contents to ensure that all
parts are present and in good conditions. If anything looks as if it has been damaged in transit, notify
the shipper immediately and keep the packing material for inspection. Again, please save the carton
and all packing materials. If a fixture must be returned to manufacturer, it is important that the fixture
has to be returned in the original manufacturer box and packing.

8.1. Content of the package:

1 x ARC One
1 x Manual
1 x Power Plug IEC
1 x DMX signal cable XLR

9. Set Up

9.1. Installation

To mount this item to a truss system it has to be flown by two different flying systems. You should use
two truss clamps to do so, and you have to use an additional safety rope to secure the unit against
falling down. Each clamp or mounting part has to be able to hold 10 times the weight of the Arc One.
Alternating you can stand the item on the ground on its rubber feet. If you do that make sure that the
unit is secured against kicking it from the stage.
.
14 / 23