Cleaning The Machine - Cookmax Volano 300 Gebrauch Und Wartung

lower the product grip 7 to hold the product; lower the lever 5 and move it to draw the product near the blade
9; drawing the product near the blade or away can be carried out more precisely using the knob 14; set up
the slice thickness desired by operating the graduated knob 4 (0÷2,7 mm); turn the flywheel 1 to start slicing
and placing the slides on the tray 12.
9
7
12
14
1
5
4

Cleaning the machine

Warning: always wear non-scratch and anti-skid protection gloves when carrying out the operations
described above. Always operate with great care and avoid any distraction.
DANGER OF CUTS!
Remove the product from the tray 6; turn the flywheel 1 by drawing the carriage 3 near the operator; press
the lever 5 down and at the same time to the right; unscrew the locking knob 15 as shown in the image;
6
3
15
5
1
12