Operating - Hama Rc500 Bedienungsanleitung

@ Operating

Instruction
Battery compartment
2 Increase/decrease the adjustment
value
3 Alarm switch
4 Snooze function
5 Seconds display
6 Alarm time display
Tlme adjustment function
8 Mode-swich to show Temperature,
or Date, or Alarm
How to Start
Insterta 1 5 V AA, ensuring correct
polarity Hands move to 4, 8, or 12 0'clock
position. Clock is now searching for a
signal. al ow up to 4 minutes for the clock
to automati cally set itself via radio signal
During reception the clock should not be
moved. If the clock fails to set, chance
place preferably near a window, remove
battery and reinsert after 1 min.
4
If your area do not have the radio-
controlled-clock signal, you can do the
manual adjustment by:
• Short press button SET (7)to do the
minute by-minute adjustment.
• Press-and-hold the button SET for 3
second, and the hands wil keep on
running Short press the button SETto
stop the hands running, and then do the
short press SETto do the minute-by
minute adjustment to your desired time
Setting the date manually by:
• Press the button MODE (8) until the
display show up the date, and then
press-and-hold button MODEfor 3
seconds. Date is flashing
• Short press the button + (2) or - (8)
date-by-date adjustment, or long
press + or - to do fast adjustment.
Wait for 3 seconds automatically
confirm, or short press (MODE)to
confirm
Setting the Language of weekday by:
• At the date mode. Press and-hold
+ or - and the LCD will show the
anguage. There are total five language
for selection
Press+ or - to select the language.
Wait for 3 seconds to automatically
confirm, or short press (MODE)to
confirm
Alarm functions
Set alarm time
Set the alarm time by pressing the + or
keys until the desired alarm time is set.
Switch On alarm
Pushthe alarm ON/OFFbutton upwards
At the set alarm time, the alarm sounds
and the face is automatically illuminated
for 5 seconds
Interrupt alarm (snooze)
Pressthe button on top 4 of the alarm
clock. The alarm is interrupted for approx.
4-5 minutes and then sounds again. The
snooze function can be repeated 6 times
within approx. 30 minutes of the set alarm
time
Automatic switch-off
If the alarm is not interrupted or switched
off, it stops automatically after approx. 2
minutes. It is reaktivated 12 hours later at
the set time. Switch off alarm. To switch off
the alarm, press the alarm ON/OFFbutton
3 down
Illumination
To be able to read the face of your alarm
clock even when it's dark, briefly press
the button 4 on the top of the alarm clock
The illumination function is activated
5 seconds.
Temperature Unit Setting
• Pressthe button (MODE)until the
Display show up temperature
• Long-press the button + unit the unit of
temperature chance
Replacing the battery:
Please use only the types of battery that
are approved for this device and ensure
thatthe polarity is correct when inserting
a new battery
for
5