Warning Label; Identification - Texas A/S TSE 2040 Benutzerhandbuch

Disposal
Electrical and electronic equipment must not be disposed of along with
ordinary household waste. Electrical and electronic equipment must be taken
to the local recycling centre where it will be disposed of responsibly.

3. Warning label

Explanation to warning pictograms (Fig. 7)
1. Pay extra attention to safety instructions marked with this symbol.
2. If the cable becomes damaged, remove the plug from the socket immediately!
3. Keep the cable away from the machine
4. Always switch off the machine, remove the plug from the socket and wait until the
machine has stopped completely before carrying out maintenance, cleaning or repair
of the product!
5. Keep clear of people and animals.
6. Never use the machine if it is raining.
7. Always read the user manual and follow the warning and safety instructions.
8. NB! Always use safety goggles and hearing protectors, when using the machine.
9. Use safety gloves.
10. Use non-slip safety footwear!

4. Identification

See Fig. 1 - 4:
1. Rear handle
2. Front handle
3. Chain brake
4. Chain
5. Chain adjustment knob
6. Cover
7. Guide bar
8. Cable holder
9. Cable
10. Claw stop
11. Safety button
12. Chain adjustment bolt
13. On/Off switch
14. Oil tank cap
15. Oil gauge
16. Chain wheel
17. Guide bolt
18. Chain adjustment screw
'
s working area.
(only TSE 2040)
(only TSE 2010)
A. Chain direction
B. Guide bar lubrication hole
C. Oil lubrication hole
D. Chain adjustment knob
(only TSE 2040)
13