Herunterladen Inhalt Inhalt Diese Seite drucken

The Wake-Up Function; Setting The Alarm Time; Setting The Alarm Source - Sonoro sonoroCD Bedienungsanleitung

Cd-digitalradio
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Setting the time interval for the Sleep Timer
Fig. 22: Setting the time interval for the Sleep Timer
1.
Hold down the[SLEEP] button on the top of the
device or the remote control for a while.
ð The Sleep Timer appears (Fig. 22) and the
Sleep symbol flashes on the display
(Fig. 22/1).
2.
Turn the click wheel to select the desired time
interval length (Fig. 22/2). The maximum time
interval is 120 minutes.
i
Alternatively, you can also use the [Next] or
[Previous] buttons to adjust the values.
3.
Press the click wheel to confirm the setting.
When the specified time expires, playback gradually
fades out.

9 The wake-up function

You can use the radio to wake up with FM/DAB radio,
a CD, Relax Music or stored ringtones.
All settings are made by pressing the [Alarm 1] or
[Alarm 2] button on the front of the device or the
remote control for a while.
The alarm functions can also be set in Standby mode
of the device.
The alarm Setup menu is structured as follows:
'Set the Wake‐Up Time è Set the Alarm Source
è Set the Alarm Volume
è Set the alarm repeat frequency è End'
i
If you do not enter any information for approx.
10 seconds when setting the alarm, the setting is
terminated without saving it.
9.1

Setting the alarm time

Fig. 23: Setting the Alarm 1
1.
Keep the [Alarm 1] or [Alarm 2] button pressed.
© 2013
ð The submenu for adjusting the alarm time is
displayed (Fig. 23).
2.
Set the hour by turning the click wheel.
3.
Press the click wheel to confirm the hours.
ð Minutes are displayed.
4.
Set the minutes by turning the click wheel.
5.
Press the click wheel to confirm the entry.
i
Use the [Next] and [Previous] buttons to
switch between the setting for hours and
minutes.
9.2

Setting the alarm source

After you have set and confirmed the wake-up time,
you can choose the source for the alarm (Fig. 24).
Fig. 24: Setting the alarm source
1.
Select the desired medium you want to wake up
with by turning the click wheel and pressing the
[MODE], [Next] or [Previous] buttons.
FM
Select an FM station preset from
the station memory that you
wish to start the radio with and
wake up to.
DAB
Select a DAB station preset from
the station memory that you
wish to start the radio with and
wake up to.
CD
Select a track from the CD you
wish to start the radio with and
wake up to.
Relax Music
Select a Relax Music sound from
the memory you wish to start
the radio with and wake up to.
Ringtone
Select a ringtone from the
memory you wish to start the
radio with and wake up to.
2.
Press the click wheel to confirm the setting.
The source is displayed on the upper part of the dis-
play and the selection is displayed on the left hand
side.
55

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

So-210

Inhaltsverzeichnis