Getting Started; Unpacking Easy; Connecting The Power Supply - Sonoro EASY SO-120 Bedienungsanleitung

3.

Getting started

3.1

Unpacking EASY

1. Take EASY out of the packaging and check whether EASY or the individual
parts exhibit damages. If this is the case, do not use EASY. Should you detect
any damage, contact your dealer or sonoro audio GmbH customer support
immediately.
2. Check to make sure that the delivery is complete (see chapter "Scope of delivery").
3. Place EASY in a suitable location.
4. Remove the protective film from the display.
3.2

Connecting the power supply

1. Insert the top end of the adapter into the upper slot of the power supply.
2. Click the bottom end of the adapter in to lock it into place.
3. To remove, first pull back the tab on the power supply.
4. Pull the adapter upwards to remove it.
1.
5. Insert the connector of the power adapter into the DC power input jack on the back
of EASY.
6. Insert the power plug into a wall socket. EASY is ready to turn on.
© sonoro audio GmbH 2018
2.
1.
2.
GB
47