HOMCOM 820-352V70 Bedienungsanleitung Seite 9

EN
To continue setting up for the next period, follow these steps:
● Press again.
● Press and select 10.
● Press .
● Press and select 17 (07:00-17:00 at 10℃).
For setting up the final period, follow these steps:
● Press again.
● Press and select 25.
● Press .
● Press and select 24 (17:00-24:00 at 25℃).
● The setting for d2 (Tuesday) is finished.
● Press to set d3 (Wednesday).
Anti-frost mode:
Keep the temperature at 7℃. Please note, whichever mode the appliance is in, if the
room temperature is lower than 7℃, the anti-frost mode will automatically begin.
4. Timer
Press to set a timer between 0-24 hours.
During any mode, when the timer reaches 0, the heater will turn off automatically.
5. Open window function
The heater has an 'open window' function that is off by default. To activate this function,
follow these steps after turning on the heater:
● Press .
● The display will show
● Press to turn on the 'open window' function. The display will show
● Press to turn off the 'open window' function. The display will show
● Press to save the setting or wait for 10 seconds to save automatically.
How the 'open window' function works:
If you open a window widely in the room, where the heater is located and the
temperature drops by 2℃ or more within two minutes, a sensor will detect the sharp drop
in temperature. The heater will switch off automatically and show
After 10 minutes, the heater will return to the previous mode. However, you can manually
restart the heater by pressing
disappear from the display.
.
and will come back to the previous mode.
8
.
.
on the display.
will