AUTO DRAINAGE & MAINTENANCE
Please disconnect the power supply before
cleaning or conducting maintenance.
Auto Drainage:
the water drainage hole by quick connector ,the machine
will automatically drain by water pump through water hose
when operating
Cleaning: Clean the unit body with a soft damp cloth. Do
not submerse or place water on the unit or control panel.
Water may damage the electronic components of the unit.
Do not use chemical solvent such as benzene, alcohol,
gasoline or other heavy-duty cleaner. The surface may
become damaged or deformed.
Cleaning the Air Filter:
Step 1: Pull out the air filter gently.
Step 2: Use a vacuum cleaner to remove the dirt on the
surface of the air filter. If the air filter is exceptionally dirty,
immerse it gently into warm water (about 104 ℉ ) with a
neutral detergent, rinse and dry it thoroughly.
Step 3: Insert the filter back into the unit.
Dehumidifier Storage:
1. Push the purge button to empty the water before
transportation or storage.
2. Transport and store the machine upright.
3. Stack machines in warehouse to save space.
Connect water hose (≤13.12 ft length) to
- 16 -