24-23-22-21-20 ... -02-01-00-24-23 ...
pump stops draining, then the indicator will turn off.
Defrosting Indicator: When the machine is
defrosting, this indicator turns on. After
defrosting, it turns off.
Water Full Indicator: When the water pump is
full of water, the indicator light turns on to remind
the user to drain
temperature. When the machine is running, it shows the
temperature and humidity of the inlet air and outlet air. It
displays the running time when it is in running mode; and
displays the setting timing and setting humidity data when
users set .
Memory Function: If there is a power outage or the unit
shuts off ,it will auto restart to default humidity setting
(10%RH) ,once power is restored .
Note :
Purge Button (Manual Drainage): Press
and hold the purge button for 3 seconds, the
machine will drain the water automatically by
the built-in pump. After 30 seconds, the
Display Screen: The
default temperature
display is Fahrenheit
temperature. When the
machine is in standby
mode, press the power
button for 5 seconds to
switch to Celsius
- 14 -