Setting The Air Flow Direction; How To Discharge The Water Tanks - Technibel MTF94 Bedienungsanleitung

SETTING AIR FLOW DIRECTION
To set the air flow direction, seize the deflector blades and pull towards
you.
EG

HOW TO DISCHARGE THE WATER TANKS

The air conditioner removes humidity of the air, collecting
the condensate into the internal tank. The condensate water can be
evacuated through the external discharge tube located on the rear of
the unit.
G When the internal tank is full, the air conditioner will automatically
stop and the water tank alarm (5) begins flashing.
The tank capacity allows approx. 4 hours operation.
G
Verify the presence of water inside the air conditioner, looking
at the rear external discharge tube.
G
Stop the air conditioner using the remote control unit, then unplug
the cable.
G
Position a container under the discharge tube.
G Grasp the tube removing it from its seat on the rear of the
air conditioner.
G Close with the inch the open end of the tube and, tilting it towards
the container, let the condensate water flow.
G At the end of the operations reinsert the discharge tube into
its place.
Every time you move the unit to another room or when you store it,
discharge also the condensate water of the secondary tank, through
the tube located inside the space for cable winding.
IMPORTANT
At the end of the operation close the tube with its stopper.
WARNING
G
Always switch off the air conditioner before unplugging it from the
power socket.
G
Always unplug the air conditioner before discharging the conden-
sate water collected inside.
8
Vertical Flow
MAIN TANK
SECONDARY TANK
Horizontal Flow