What To Do If - Becker Centronic VarioControl VC470 Montage & Betriebsanleitung

Assembly and Operating Instructions
Malfunction
Drive is not running.
The VC470 does not
execute manual con-
trol commands.
The VC470 does not
execute automatic
control commands.
Venetian blind tilts
delayed in the lower
end position.
The curtain retracts
without a manual
or automatic travel
command.
28

What to do if...?

Cause
Faulty connection.
Transmitter is not pro-
grammed in the VC470.
1. Transmitter is not pro-
grammed in the VC470.
2. Sliding switch of the
transmitter is set to
manual .
The Venetian blind has
been adjusted to the
lower end position twice
within one second via the
DOWN button.
Radio contact between
the sensor and the receiv-
er is defective.
Solution
Check connection.
Programme transmitter.
1. Programme transmit-
ter.
2. Set the sliding switch of
the transmitter to auto
U.
1. Delete tilt position.
2. Set intermediate posi-
tion.
1. Check the radio con-
tact between the sen-
sor and the receiver.
2. You can extend the
curtain for one hour in
deadman mode.