Ruris R-Power IS2000 Handbuch Seite 20

EN
2) Visually check the spark plug. Replace any spark plug that shows wear or has a cracked/defective dielectric.
In the case of reuse, cleaning with a wire brush is necessary.
CAREFUL! Do not touch the spark plug shortly after the machine has been stopped as it is
extremely hot.
3) Measure the gap using a tape measure. Adjust the electrode, if necessary, to. 0.6-0.7mm.
4) Check that the spark plug mounting washer is in proper condition.
5) Screw in the spark plug by hand as far as it will go, then tighten with the special wrench.
Keep the gasket firmly in place.
CAREFUL! When installing a new spark plug, it will be tightened half a turn by fixing the
gasket accordingly. When installing a used spark plug, it will be tightened 1/8-1/4 after the gasket is properly
secured.
▪ The spark plug must be tight. Otherwise, it will become extremely hot and cause damage to the machine.
▪ Use the recommended spark plug. Otherwise, the machine may be damaged.
8. DECLARATIONS OF CONFORMITY
DECLARATION OF CONFORMITY CE
Manufacturer: SC RURIS IMPEX SRL
Blvd. Decebal, no. 111, Administrative Building, Craiova, Dolj, Romania
Goal. 0351 464 632, www.ruris.ro, info@ruris.ro
Authorized representative: Eng. Stroe Marius Catalin – General Manager
Authorized person for the technical file: Eng. Alexandru Radoi – Production Design Director
Description of the machine: The GENERATOR based on inverter technology ensures a continuous supply of
electricity, being driven by a 4-stroke engine.
Product:
Generator-Inverter
Product serial number: AAHW00300001XXXXIS2000 (where AA represents the last two digits of the year
of manufacture, characters 5 and 7 batch number, characters 7-12 the product number)
Type: RURIS Model : RURIS R-Power IS2000
Power : 3 hp Maximum generator power : 2000 W
Engine : thermal, 4-stroke, unleaded gasoline Working frequency : 50Hz
We, SC RURIS IMPEX SRL Craiova, manufacturer, in accordance with HG 1029/2008 - regarding the conditions
for the introduction of cars on the market, Directive 2006/42/EC - cars; safety and security requirements ,
Directive 2014/30/EU on electromagnetic
Standard EN ISO 12100:2010 – Machinery. Security,
compatibility (HG487/2016 on electromagnetic compatibility, updated 2019),
Directive 2014/35/EU, HG
409/2016 - on low-voltage equipment, EU Regulation 2016/1628 (amended by EU Regulation 2018/989) -
establishing measures limiting gaseous emissions and polluting particles from engines and HG 467/2018
regarding the enforcement measures of the mentioned Regulation, we have certified the conformity of the product
with the specified standards and declare that it complies with the main safety and security requirements.
The undersigned Stroe Catalin, the manufacturer's representative, declares on his own responsibility that
the product is in accordance with the following European standards and directives:
SR EN ISO 12100:2011 / EN ISO 12100:2010 - Machine safety. Basic concepts, general design principles.
Basic terminology, methodology. Technical principles
SR EN ISO 8528-13:2016/ EN ISO 8528-13:2016 – Alternating current generating sets driven by internal
combustion engines with alternating motion. Part 13: Security
SR EN IEC 60309-1:2022/ EN IEC 60309-1:2022- Plugs, fixed or mobile sockets and connectors for
industrial use. Part 1: General requirements
SR EN IEC 60309-2:2022/ EN IEC 60309-2:2022- Plugs, fixed or mobile sockets and connectors for
industrial use. Part 2: Dimensional compatibility requirements for pin and socket devices
SR EN IEC 60934:2019/ EN IEC 60934:2019- Automatic switches for equipment (DPE)
SR EN 61984:2010/ IEC 61984:2008- Connectors. Safety regulations and tests
SR EN 61010-1:2011/ EN 61010-1:2010- Safety rules for electrical measuring, control and laboratory
equipment. Part 1: General requirements
SR EN 55012:2008/A1:2010/ EN 55012:2007/A1:2009 - Vehicles, boats and internal combustion engines.
Characteristics of radioelectric disturbances. Limits and measurement methods for the protection of
outdoor receivers
9