Ruris RXE1200 Handbuch Seite 14

EN
5. ASSEMBLY
A1
1.Insert the handle into the machine body and secure with the included nuts (A1).
2. Attach the cable clip to the top handle (A2).
3. Attach the upper handle to the lower handle (A3).
4. Fix the cables using the supplied clamps.
5. Mount the collection bag (A4).
Cutting height adjustment
Warning: The blade continues to rotate for several seconds after the machine has been stopped.
Unplug the mower from the power source and make sure the blade is turned off before adjusting the
cutting height.
To achieve the desired cutting length, the front axle and rear axle
can be repositioned under the engine housing.
Cutting height positions:
1) 25mm (lowest cutting position)
2) 45mm
3) 60mm (highest cutting position)
6. COMMISSIONING
6.1 Connecting to the power source
Warning! Before connecting to the power source, make sure the switch is in the OFF position. Connect the
plug to a power source equipped with an RCD switch.
5