15.3 TECHNICAL DATA
Effective surface on top of an avalanche: 1,055 mm
System weight: 1,460g (not including inflator)
Airbag material: Polyamide 6.6
Activation: Pyrotechnical electric ignition (as used in
the automotive sector) in the puncture unit, nitrogen
filling procedure: < 5 seconds
Cylinder: Made from highly durable carbon fibre with
an aluminium core, designed to cope with pressures
over 300 bar. Comply with EC directives.
Cylinder may only be refilled by ABS.
Carrying system: Complies with TÜV requirements for
extreme operational demands.
Radio frequency band for Europe: 868 MHz (other
international frequencies are integrated and can be
activated by ABS)
Battery: Lithium polymer battery, operating time in
individual mode: 240 h = 30 days at 8 hours each
Operating temperature: -30°C to +50°C
USB charging: Temperature range 0°C to +40°C
62
English
15.4 CERTIFICATION AND CONFORMITY
Manufacturer: ABS Protection GmbH
2
Gundelindenstraße 2, 80805 München
Country of manufacture: Germany
Type: ABS
Avalanche Airbag System
®
The nature of the materials and the kind of workman-
ship used for the development of the ABS
Airbag System are based on the standard values of
comparable usage requirements. These standard values
form the requirement profile for the material and
operating tests conducted by TÜV Süd Product Service
GmbH as part of GS mark testing (tested safety),
according to PPE Regulation (EU) 2016/425, CE
guidelines and EN standard 16716.
However, forces and circumstances may arise during an
avalanche that exceed these standard values. We would
therefore explicitly point out that the ABS
System in its entirety and in parts (airbag material,
attachments, backpack etc.) cannot withstand all
possible demands which may arise during an avalanche
incident.
TÜV Süd Product Service GmbH, Daimlerstr 11
85748 Garching Test centre no. 0123
ABS Protection GmbH is a certified company in accor-
dance with ISO 9001:2015.
The ABS
P.RIDE System is Made in Germany.
®
Avalanche
®
P.RIDE
®