Herunterladen Inhalt Inhalt Diese Seite drucken

VEVOR RBTYNLD-001 Bedienungsanleitung Seite 2

Solar-strassenbeleuchtung
Inhaltsverzeichnis
Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Solar Street Light
Application Method:
The lamp has been charged with electricity before leaving our factory. Please
check whether the lamp can normally light on before installating.
1.Test the solar panel
Open the package, take out the lamp and solar panel, put it in the place where
sunlight is ample, connect the lamp with the panel, the indicator shows charging
condition, cover the panel with carton or pull up the connection wire, then the
lamp lights on, it shows the panel can normally work and the battery can
normally be charged.
2. Test the lamp and remote controller
Take out the remote controller, assembly the battery, push OFF button to turn
off the lamp, then push ON button to turn on the lamp, successively test the
button of AUTO, timing and brightness patten, it indicates the lamp can normally
work if all buttons leads to the feedback information.
remote controller explanation:
◇ON/OFF: switch(lose efficacy by light)
◇3H: timing 3Hs
◇AUTO:automatic pattern/turn off
◇5H:timing 5Hs
◇half brightness/full brightness
◇8H: timing 8Hs
◇+/- M adjust brightness/sensor pattern(not enabled)
Installation key:
◇Fix the lamp on the wall with the expansion screws, or fix it on the pole as the second method
below.
◇Fix the solar panel with "U"bracket on the round board of lamp arm, adjust the angle to lock
fasten(standard: to the south by west by 5~10°, and there is a angel to the horizontal plane, 30° in
the south and 45° in the north).
◇Insert the lamp into the lamp arm, adjust the angle to lock fasten.
◇Connect the solar panel with lamp, lock the waterproof cover fasten, installation finished.
◇The solar panel must be vertically illuminated by sun. It can't be covered by any buildings or trees
to guarante the longest illumination time(don't install the panel under glass or indoor). Only correct
scientifically install the solar panel, can the charge effect meet the best.
No.1 Method
Safety warnings:
◇Don't disassembly the product.
◇Don't charge the product by any chargers.
◇Contact with the local dealer if battery has problem.
◇Don't use any battery which isn't provided by our company.
◇If you don't obserb the above tips, our factory won't take any
responsibility for any quality problem and safety problem.
No.2 Method
Inhaltsverzeichnis
loading

Inhaltsverzeichnis