Maintenance And Service; Maintenance And Cleaning - Bosch PTK 14 E Originalbetriebsanleitung

OBJ_BUCH-109-003.book Page 17 Thursday, August 12, 2010 8:13 AM
The data in the following table are recommend-
ed values. Determine the settings for double-
staple application (Duotac) through practical
testing. The staples used must be 3–4 mm long-
er than the thickness of the material.
Staple length (mm)
Material thickness
(mm)
Position of Thumb-
wheel 2
– Stapling paper
– Stapling fabric
Support Foot (see figure B)
The support foot 12 enables exact vertical
placement of the machine.
Spacer Clamp (see figure C)
The spacer clamp 14 enables tacking of sta-
ples/nails with consistent clearance to the
workpiece edges. The variable possibilities for
clicking on allows for many clearance levels.

Maintenance and Service

Maintenance and Cleaning

Before any work on the machine itself, pull
the mains plug.
For safe and proper working, always keep
the machine and ventilation slots clean.
If the machine should fail despite the care taken
in manufacturing and testing procedures, repair
should be carried out by an after-sales service
centre for Bosch power tools.
In all correspondence and spare parts order,
please always include the 10-digit article
number given on the type plate of the machine.
Bosch Power Tools
After-sales Service and Customer
Assistance
Our after-sales service responds to your ques-
tions concerning maintenance and repair of your
product as well as spare parts. Exploded views
6 8 10 12
and information on spare parts can also be
found under:
www.bosch-pt.com
3 4 6 8
Our customer service representatives can an-
swer your questions concerning possible appli-
cations and adjustment of products and acces-
3 3–4 5 6
sories.
1 2 2–3 3
Great Britain
Robert Bosch Ltd. (B.S.C.)
P.O. Box 98
Broadwater Park
North Orbital Road
Denham
Uxbridge
UB 9 5HJ
Tel. Service: +44 (0844) 736 0109
Fax: +44 (0844) 736 0146
E-Mail: boschservicecentre@bosch.com
Ireland
Origo Ltd.
Unit 23 Magna Drive
Magna Business Park
City West
Dublin 24
Tel. Service: +353 (01) 4 66 67 00
Fax: +353 (01) 4 66 68 88
Australia, New Zealand and Pacific Islands
Robert Bosch Australia Pty. Ltd.
Power Tools
Locked Bag 66
Clayton South VIC 3169
Customer Contact Center
Inside Australia:
Phone: +61 (01300) 307 044
Fax: +61 (01300) 307 045
Inside New Zealand:
Phone: +64 (0800) 543 353
Fax: +64 (0800) 428 570
Outside AU and NZ:
Phone: +61 (03) 9541 5555
www.bosch.com.au
English | 17
1 609 929 V25 | (12.8.10)