Product Use
Usage of device
Start up
Fill the raw water tank with water below the handle and install it in place. Plug in the power plug,
the machine makes a beep sound and all the indicators on the display screen light up for about
1 second, and then enter into normal display state. The machine starts to purify water.
How to take water
Water purification icon shows "
" or "
", water cannot be dispensed.
When water purification icon shows "
" or "
" or goes out, water can be dispensed by
pressing dispense tap.
Take ambient temperature water
Press dispense tap directly to take ambient temperature water, the dispense tap light becomes
blue, press the tap again to stop taking water.
Take hot water
First touch the temperature icon on display screen to select water temperature. The temperature
can be selected from 45 ℃ /110 ℉、55 ℃ /130 ℉、65 ℃ /150 ℉、75 ℃ /165 ℉、85 ℃ /185 ℉、
98 ℃ /200 ℉ . Press dispense tap to take water of the chosen temperature, the dispense tap
light becomes red. Press the tap again to stop taking water.
Note:
The device has 220-230V and 120V voltage version for different market. High voltage version water
temperature please refer to℃ and low voltage version water temperature please refer to ℉ .
Take cold water
When cooling indicator "
" is on and "
" has at least one cell, touch "
" button and then
press dispense tap to get cold water.
If cooling function is turned off, "
" light turns dark. In this status if user touches "
" button
and then presses dispense tap , "
" indicator will blink and no water will be dispensed.
Note:
The cooling function is turned off by default and need to be turned on in first use of the device.
Customize water volume
Touch the water volume icon to select the water output volume, which can be selected as
120mL, 200mL, 300mL, 500mL, press dispense the dispense button to dispense water of
specified volume.
Replace raw water
When the display screen shows "
" , empty the remaining water in the raw water tank, fill the
raw water tank with water up to below the handle.
11