Jimmy bewinch R9 Pro Bedienungsanleitung Seite 12

Cooling indicator
The cooling indicator " " displays in below status:
Cooling function is turned off: Indicator goes out
Under cooling: Indicator blinks
Cooling indicator
Cooling completed: Indicator stays on
The cooling function is turned off by default and need to be turned on
in first use of the device.
Cooling function button
The " " button is used to turn on or turn off the water cooling function
and to choose cold water dispense under below operation:
Keep pressing " " button for 5 seconds to turn on or turn off water
cooling function.
Child lock function
Shortly touch " " button and then press dispense tap to get cold
water. If there is no operation 10 minutes after shortly touching " "
button, device will go back to ambient water dispense status.
If cooling function is turned off, " " light turns dark. In this status if
user touches button and then presses dispense tap, " " indicator will
blink and no water will be dispensed.
Note:
The cooling function is turned off by default and need to be turned on in first use
of the device.
Display screen energy saving mode
When the machine is not in use for 1 minute, the display will dim.
Touch any button, the display will light up again and it can be used
normally.
10