Jimmy bewinch R9 Pro Bedienungsanleitung Seite 10

Display indicator description and usage
Raw water
TDS indicator
Child lock
button
Water volume
icon button
Water temperature
icon button
Raw water replacement
indicator
Hot water temperature icon button
To dispense hot water, touch the temperature icon to select hot water temperature. The water
temperature available is 45℃ /110 ℉、55℃ /130 ℉、65℃ /150 ℉、75℃ /165 ℉、85℃ /185 ℉、
98℃ /200 ℉ . In the process of dispensing water, when dispensing ambient water or cold water,
the water dispensing light is blue. When dispensing hot water,the water dispensing light shows
red. Stop dispensing water, the water dispensing light goes out. When flushing, the water
dispensing light is green.
Note:
1. The device has 220-230V
temperature please refer to℃ and low voltage version water temperature please refer to ℉ .
2. The machine is equipped with plateau mode, when taking 98℃ /200 ℉ hot water, if the temperature cannot
reach 98℃ /200 ℉ after 20 seconds, the plateau mode will be automatically turned on to adjust the water
temperature. If the altitude of the use environment is more than 1500 meters, it is not recommended to use
200 ℉ hot water at this time, there may be steam spraying, please be careful of scalding.
Water volume icon button
Touch water volume icon button to select fixed water volume to get. The fixed water volume can
be selected from 120mL, 200mL, 300mL and 500mL.
8
Water purification
indicator
~ ~
and 120V voltage version for different market. High voltage version water
TDS indicator
Cooling function
Filter life indicator
Cooling indicator
Pure water
button