Jimmy bewinch R9 Pro Bedienungsanleitung Seite 17

Filter replacement method and filter life indicator reset
Step 1. Power off the whole machine, remove raw water tank and top cover of the purifier, twist
the filter to unlock position according to the instructions on the machine and lift out the
filter.
Step 2. Place the new filter by pointing the arrow down and twist the filter from the unlock
direction to the lock direction.
Step 3. After power on, first keep pressing "98 ℃ /200 ℉ " icon for 5 seconds, No 1, 2, 3 filter life
indicator start to flash ( If user does not carry on next step operation, the flashing will
stop after 10 seconds). At this time, keep pressing "45 ℃ /110 ℉ " for 5 seconds and
No.1 filter life resets, keep pressing "55 ℃ /130 ℉ " for 5 seconds and No.2 filter life
resets, keep pressing "65 ℃ /150 ℉ " for 5 seconds and No.3 filter life resets. After filter
life resets, the corresponding filter life indicator resumes full "
Step 4. After replacing the filter, please refer to the steps of flushing before use in " Product
Assembly " and empty the pure water cup for three times to complete the flushing of the
new filter.
Top cover
Unlock direction
lock direction
" states.
15