Product Use - Jimmy Bewinch R9 Bedienungsanleitung

Child lock function

Product Use

Usage of device
Start up
Fill the raw water tank with water below the handle and install it in place. Plug in the power plug,
the machine makes a beep sound and all the indicators on the display screen light up for about
1 second, and then enter into normal display state. The machine starts to purify water.
How to take water
Water purification icon shows "
When water purification icon shows "
pressing dispense tap.
Take ambient temperature water
Press dispense tap directly to take ambient temperature water, the dispense tap light becomes
blue, press the tap again to stop taking water.
When the raw water TDS value is higher than " 999 ", the buzzer
sounds to remind replacing raw water. Press and hold the "
for 5 seconds to cancel the alarm. Press and hold again to restore the
reminder function.
Child lock function
Child lock function is for preventing child to use the device. Press
and hold the "60mL" icon button for 5 seconds, release after hearing
a "beep" sound, the child lock icon lights up and the raw water TDS
displays LOC. The device cannot dispense water or drain water. If you
want to turn off the child lock function, press and hold the "60mL" icon
button for 5 seconds, release when hearing a "beep" sound, the child
lock icon will be turned off, the raw water TDS display resumes normal
value. The child lock function is off by default.
Display screen energy saving mode
When the machine is not in use for 1 minute, the display will dim.
Touch any button, the display will light up again and it can be used
normally.
" or " ", water cannot be dispensed.
" or " " or goes out, water can be dispensed by
" button
85℃
9